No products were found matching your selection.
Other Related Products
-
- Material:Optical-grade PET film with ITO conductive coating
- Appearance:Clear to light gray transparent conductive surface
- Typical Thickness:125 mm / 0.175 mm
- Sheet Resistance:10–150 Ω/sq typical range
- Conductive Side:Single-side ITO electrode layer
- Format:Sheet, roll, slit roll, or cut piece
-
- Material: PA/PE coextruded film
- Optional barrier: PA/EVOH/PE
- Common thickness: 60–300 μm
- Common width: 300–1200 mm
- Color: Transparent, white, black
- Use: Vacuum and MAP thermoforming packs
-
- Material: PET or PE based film
- Color: Clear, blue, or custom tinted
- Thickness: Commonly 50–80 microns
- Width: Standard and custom slit widths
- Length: Standard industrial roll lengths
- Adhesion: Low-tack easy-peel adhesive system
-
- Material: PET polyester film with hard coated surface
- Finish Options: Clear, matte, anti-glare, textured
- Typical Thickness: 125 / 175 / 250 micron
- Coating Structure: One-side or two-side hard coat
- Roll Format: Standard rolls and custom slit widths
- Main Uses: Display windows, touch panels, overlays, control surfaces
-
- Material: BOPET polyester film
- Product type: corona treated PET film
- Appearance: clear, smooth, treated surface
- Thickness: 12 um to 188 um common range
- Treatment option: one side or two side corona treatment
- Surface tension: 50-54 dyne/cm typical treated side
-
- Material: PE protective film
- Adhesive: water-based acrylic PSA
- Thickness: 30–120 microns
- Colors: clear, blue, black & white, printed
- Width: 100–2000 mm
- Suitable Surfaces: glossy, matte, brushed, anodized, painted aluminum
-
- Material: PE temporary surface protection film
- Colors: clear, blue, black/white
- Thickness: 30-80 micron typical
- Adhesion: low, medium, or surface-matched tack
- Roll form: custom slit widths and roll lengths
- Suitable surfaces: stainless steel, aluminum, galvanized, and painted sheet
-
- Material: PE film with acrylic adhesive
- Colors: clear, blue, green, or custom tinted
- Thickness: 35–70 microns
- Roll sizes: 600 mm / 1200 mm × 100 m / 200 m
- Use type: temporary indoor or outdoor surface protection
- Removal: clean peel-off within the recommended dwell time
-
- Material options: polyimide, PEI, PEEK, FEP, and related high heat film structures
- Common colors: amber, transparent, natural, black, or custom
- Thickness: custom by film type and end use
- Surface options: plain, treated, coated, laminated, or adhesive-ready
- Supply form: log rolls, slit rolls, sheets, and die-cut parts
- Typical uses: insulation, masking, laminating, converting, and industrial protection
