No products were found matching your selection.
Other Related Products
-
- Material: PET or PE based film
- Color: Clear, blue, or custom tinted
- Thickness: Commonly 50–80 microns
- Width: Standard and custom slit widths
- Length: Standard industrial roll lengths
- Adhesion: Low-tack easy-peel adhesive system
-
- Material: PE temporary surface protection film
- Colors: clear, blue, black/white
- Thickness: 30-80 micron typical
- Adhesion: low, medium, or surface-matched tack
- Roll form: custom slit widths and roll lengths
- Suitable surfaces: stainless steel, aluminum, galvanized, and painted sheet
-
- Material: PE film with acrylic adhesive
- Colors: clear, blue, green, or custom tinted
- Thickness: 35–70 microns
- Roll sizes: 600 mm / 1200 mm × 100 m / 200 m
- Use type: temporary indoor or outdoor surface protection
- Removal: clean peel-off within the recommended dwell time
-
- Typical thickness: 50–120 microns
- Standard colors: clear, blue, black & white
- Film options: PE, PET, or custom structure
- Adhesive system: acrylic pressure-sensitive adhesive
- Tack levels: low, medium, high
- Common use: fabrication, transport, storage, installation
-
- Material: Flame retardant PET substrate
- Flame Rating: UL94 VTM-0 / V-0
- Thickness: 25–250 μm typical
- Tolerance: ±5% typical
- Surface: Smooth, treated, printable
- Use: Battery, PCB, electrical insulation
-
- Material options: polyimide, PEI, PEEK, FEP, and related high heat film structures
- Common colors: amber, transparent, natural, black, or custom
- Thickness: custom by film type and end use
- Surface options: plain, treated, coated, laminated, or adhesive-ready
- Supply form: log rolls, slit rolls, sheets, and die-cut parts
- Typical uses: insulation, masking, laminating, converting, and industrial protection
-
- Material: Acrylic OCA pressure-sensitive adhesive
- Appearance: Clear, colorless optical grade
- Thickness range: 25–250 μm
- Release liner: PET liner, single or double side
- Typical optical data: ≥99% transmittance, ≤1.0% haze
- Main use: Display bonding and touch panel lamination
-
- Material: PA/PE coextruded film
- Optional barrier: PA/EVOH/PE
- Common thickness: 60–300 μm
- Common width: 300–1200 mm
- Color: Transparent, white, black
- Use: Vacuum and MAP thermoforming packs
-
- Material: PET carrier film with pressure sensitive adhesive
- Supply form: Jumbo roll, slit roll, or sheet
- Color: Clear gloss, matte clear, white, or custom treated
- PET thickness: 25 um, 36 um, 50 um, 75 um, 100 um
- Adhesive layer: Permanent acrylic PSA, removable PSA, or lamination PSA
- Release liner: Glassine paper, PE-coated paper, or PET release liner
