Protective Film Rolls Company is a screen protector film material manufacturer supplying PET, TPU, hydrogel, and removable protective film for screen surface protection and converting roll stock. The range includes clear, matte, privacy, and anti-glare grades in rolls, sheets, and die-cut parts. These materials are used for screen-protector conversion, LCD and touch-panel handling, display-window protection, and clean removal.
Showing all 3 results
This screen protector film material category covers plastic film for screen protection used in three workflows: finished screen-protector conversion, display-module protection, and custom-cut protection for electronic components. Flat LCD panels, touch panels, display windows, and cover lenses may require different materials or adhesives. A removable grade should remain stable during assembly, inspection, storage, and transit, then peel away without residue, visible outlines, or surface marks.
Clear PET screen protector film roll is used for flat displays, display windows, and precision die-cut sheets where dimensional consistency matters. Matte and anti-glare PET film for screen protection is selected when reflection needs to be reduced. Privacy roll stock suits office displays, laptops, and terminals requiring limited side-angle visibility. TPU and hydrogel rolls suit 2.5D edges, lightly curved displays, and cutting-machine projects where conformability matters.
Protective touch screen film is available for temporary coverage during processing, inspection, and transport. Formats include master rolls, slit rolls, sheets, kiss-cut sheets, and custom-cut parts.
When selecting screen protector film material, confirm whether the film stays on the device or is removed during assembly. For temporary LCD and touch-panel protection, the adhesive should match the surface, dwell time, handling route, and removal stage. A clear LCD display film should allow inspection after lamination while staying evenly attached.
Initial tack alone is not enough. A grade that is too low may lift during transit, while an unsuitable adhesive may leave residue after a longer dwell period. Some temporary LCD grades may use 0.045-0.070 mm reference thickness and 0.05-0.90 N/20 mm adhesion on acrylic plate. Final values should be confirmed by grade, adhesive system, test method, dwell time, and display surface. Before bulk use, check clarity, bubbles, edge lifting, residue, and ghosting on the actual substrate.
PET is usually the practical choice for flat LCD panels, display windows, and die-cut sheets because converting stability is the priority. TPU and hydrogel rolls are better matched to 2.5D edges, light curvature, and flexible formats requiring conformability. Select surface finish separately: clear film supports inspection, matte and anti-glare grades reduce reflection, and privacy film limits side-angle viewing. Before repeat production, compare slit width, winding direction, and machine setup with the approved sample.
Item | Typical Range / Customizable Value |
Base Material | PET / TPU / hydrogel / removable protective film |
Product Use | Finished converting stock / temporary touch-panel protection / die-cut material |
Surface Finish | Clear / matte / privacy / anti-glare / anti-fingerprint option |
Thickness | Grade-dependent; selected temporary LCD grades may use 0.045-0.070 mm reference thickness |
Adhesive Option | Removable acrylic / silicone / polyurethane / matched low-tack grade |
Adhesion Reference | Grade-dependent; selected temporary LCD grades may use 0.05-0.90 N/20 mm on acrylic plate; confirm by test method and substrate |
Supply Format | Master roll / slit roll / sheet / kiss-cut sheet / die-cut part |
Roll Width | Standard master-roll width or custom slit width |
Roll Length | Confirm by material grade and rewinding plan |
Core Size | Confirm before slitting and rewinding |
Winding Direction | Inside or outside winding for the equipment |
Dimensional Control | Slit-width and sheet-size tolerance confirmed after trial converting |
Converting Support | Slitting / rewinding / sheeting / laminating / kiss cutting / precision die cutting |
Validation | Actual-substrate lamination / dwell-time removal / residue / edge-lifting review |
Repeat-Order Control | Approved sample / retained reference / batch consistency review |
Protective Film Rolls Company can match width, length, core size, and winding direction to the converting workflow. For sheets or die-cut material, confirm dimensions, drawings, pull-tab design, kiss-cut layout, and spacing. For adhesive film for screen protection, approval should also cover slit-edge cleanliness, adhesive overflow, stringing, waste stripping, and clean removal after the required dwell period.
Test the film on the actual LCD panel, touch panel, display window, or cover lens. The selected grade should laminate evenly, remain clear for inspection, resist edge lifting, and peel cleanly at the intended stage. For custom parts, review bubbles, residue, ghosting, die-cut consistency, and waste-stripping behavior. Keep the approved sample as the repeat-order reference.
Yes. Available formats include master rolls, slit rolls, sheets, kiss-cut sheets, and die-cut parts.
Use ultra-low tack only after checking the display surface and dwell time. A grade that is too low may lift during handling or transit.
Confirm the material, finish, roll format, slit width, core size, winding direction, part drawing, pull-tab needs, and removal timing.
Compare each repeat order with the retained reference and review roll flatness, edge quality, lamination appearance, removal behavior, and residue risk.
