Protective Film Rolls Company is an anti scratch protective film manufacturer supplying PET hard-coated, scratch-resistant, and anti-glare films for display windows, touch panels, control panels, graphic overlays, and nameplate panels. The range includes permanent hard-coated PET film for long-term surface performance and removable PET film for temporary protection during printing, assembly, storage, and transport. Grades are matched to the finished panel, viewing environment, cleaning routine, and converting process.
Showing all 2 results
Hard-coated PET film is used where the outer surface must remain clear, presentable, and resistant to daily wear. A stable polyester base is combined with a clear, matte, anti-glare, or textured hard coat that stays on the finished component. A removable scratch resistant protective film serves a different purpose: it shields the surface during converting and handling, then peels away before the part enters service. Some projects require both layers at different stages.
The category covers clear hard-coated PET film for readable display windows, matte and fine-textured grades for operating surfaces, and anti glare film sheet options for control panels installed under bright indoor lighting. Printable grades suit membrane switches, graphic overlays, appliance interfaces, and nameplate windows. Chemical-resistant grades are intended for surfaces cleaned repeatedly. UV-resistant grades can be considered for exposed interfaces. Removable PET grades are also available for temporary process protection.
Start with the completed panel rather than film thickness alone. A display window usually needs low haze and good visual clarity. A high-touch area under overhead light may benefit from a matte or textured finish. The same overlay can use a clear window and a textured operating zone. For cleaned panels, review the actual cleaner, contact time, and wiping frequency. For printed overlays, confirm print side, ink system, embossing area, die line, clear-window position, core size, and winding direction. Common mistakes include excessive haze, hardness claims without abrasion conditions, and approval before the full panel construction is tested.
Anti-glare performance should match the viewing environment rather than the highest haze value automatically. For transparent windows, compare haze and light transmittance using an agreed method such as ASTM D1003. Some anti-glare grades may target >=90% light transmittance. For cleaned panels, test the actual cleaner, sanitizer, or solvent. Record gloss change, haze increase, coating softening, discoloration, and visible damage. For wear validation, review the abrasive wheel, load, cycle count, and post-abrasion haze change.
Item | Typical Range / Customizable Value |
Base material | PET / polyester base film |
Functional structure | Clear, matte, anti-glare, or textured hard coat layer |
PET thickness | Common references: 125, 188, and 250 um |
Hard-coat side | One-side hard coat / two-side coating option by grade |
Surface finish | Clear / gloss / matte / fine matte / anti-glare / textured |
Pencil hardness | Grade-dependent; confirm by agreed method such as ASTM D3363 |
Haze | Clear grades may target <1.5%; anti-glare references may include 10%, 30%, or 50% |
Light transmittance | Some anti-glare grades may target >=90%; confirm by haze and test method |
Abrasion validation | Confirm wheel, load, cycles, and post-abrasion haze change |
Chemical-wipe validation | Confirm agent, contact time, wipe frequency, and inspection criteria |
Printing / converting | Screen printing / first-surface or second-surface printing / UV inks / solvent inks / embossing / die cutting / laser cutting |
Supply format | Roll / sheet / slit roll / converted part |
Roll controls | Confirm width, length, slitting tolerance, roll flatness, core size, and winding direction |
Temporary protection | Verify clean removal, residue, ghosting, and surface marks on the actual panel |
As an anti scratch protective film supplier, Protective Film Rolls Company can match thickness, hard-coat side, texture, haze target, gloss level, roll width, roll length, sheet size, and slitting tolerance to the application. For printed overlays, confirm printing side, ink type, clear-window position, embossing area, die line, and winding direction. For volume orders, record the approved sample, retained-sample reference, batch identification, roll flatness, and inspection method so repeat orders remain consistent. Working with an anti scratch protective film manufacturer is more efficient when these references are agreed before production.
Choose hard-coated PET film when surface hardness, abrasion resistance, optical finish, and chemical-wipe durability must remain part of the component throughout its service life. Choose removable PET protective film for production, assembly, handling, or transport only. Some projects use both: a permanent PET scratch resistant film and a removable layer checked for clean removal, residue, ghosting, and surface marks at the planned removal stage.
Clear film prioritizes visibility. Anti-glare film reduces reflected light through a matte or textured surface.
Confirm optical properties, pencil hardness, abrasion conditions, chemical-wipe resistance, converting compatibility, and actual-panel validation.
Yes. A clear window can preserve readability while textured areas reduce glare.
No. It is useful when the finished surface needs temporary protection during processing or transport.
