Protective Film Rolls Company is a PE protective film factory producing temporary adhesive films for industrial surface protection. The range includes PE / LDPE film with acrylic PSA in low, medium, and high tack grades for stainless steel sheets, PMMA, PC, PVC, ABS, coated panels, and appliance housings. Clear, blue, black-white, and printed rolls are available in slit-roll and jumbo-roll formats. Each grade is selected to stay flat during handling and remove cleanly at the planned removal stage.
Showing all 7 results
PE protective film is used during production, assembly, storage, and transportation to limit scratches, dust, dirt, and handling marks. It is made for temporary surface protection rather than packaging. A reliable adhesive surface protection film needs enough contact to stay in place without excessive peel resistance.
Thickness is only one part of the decision. Surface texture, gloss level, coating condition, acrylic PSA, dwell time, and lamination method also matter. A smooth PMMA sheet may need a different tack level from a textured appliance housing, even at the same thickness.
Start the surface protection film specification with the actual substrate. Stainless steel, PMMA, PC, PVC, ABS, coated panels, and appliance housings should not be treated as interchangeable. A stainless steel surface protective film approved for a decorative sheet should not automatically be used as a plastic surface protective film for every polymer panel.
Tack that is too low can allow edges to lift. Tack that is too high can increase peel resistance or leave adhesive marks. Before confirming a bulk order, review the approved sample, roll dimensions, core size, winding direction, lamination method, and expected dwell time.
Bulk approval should be based on the actual panel rather than a reference surface alone. A 180-degree peel test can compare grades, but it should be reviewed with planned dwell time, residue inspection, adhesive-transfer observation, and an edge-lift check. Lamination trials should show whether the roll runs smoothly without wrinkles or bubbles. Where appearance matters, check for gloss change. Retained samples and batch references keep repeat orders aligned with the approved grade.
Item | Typical Range / Customizable Value |
Base Film | PE / LDPE film |
Adhesive System | Acrylic PSA, selected by substrate and removal requirement |
Product Types | Low tack, medium tack, high tack |
Typical Thickness | 25-120 um |
Color Options | Clear, blue, black-white, or custom printed |
Surface Compatibility | Stainless steel, PMMA, PC, PVC, ABS, coated panels, appliance housings |
Roll Width | Custom slit width matched to panel size or equipment |
Roll Length | Custom length for manual or automatic lamination |
Supply Format | Slit roll, jumbo roll, long-length roll |
Printing Options | Logo, arrow, warning text, handling instruction |
Core Size | Selected to match unwinding equipment |
Winding Direction | Regular wound or reverse wound |
Slitting Control | Slit-width tolerance and edge quality confirmed by order |
Roll Condition | Roll flatness and winding quality checked before dispatch |
Validation Items | 180-degree peel reference, residue inspection, adhesive-transfer observation, edge-lift check |
Repeat Orders | Approved sample, retained sample, batch consistency, batch traceability |
Protective Film Rolls Company can adjust the PE / LDPE film grade, acrylic PSA, tack level, thickness, roll width, roll length, color, printing, core size, and winding direction. Slit rolls can be prepared for direct use, while jumbo rolls support downstream converting. For repeat production, record the approved substrate, finish, lamination method, dwell time, removal stage, retained sample, and batch reference.
The right tack level depends on finish, contact area, and removal requirement. Low tack grades are tested first on smooth or sensitive panels. Medium tack grades suit many standard plastic sheets and appliance surfaces. Higher tack grades may be needed for lightly textured finishes where edges are more likely to lift. PMMA, PC, PVC, and ABS panels should not be approved as one universal grade. A trial on the actual substrate is the reliable way to confirm the final choice.
It is commonly used on stainless steel, coated panels, PMMA, PC, PVC, ABS, and appliance surfaces. Sample validation is recommended because finish and tack requirements vary by substrate.
Yes. It keeps the protected finish visible during production checks, assembly, and handling.
Yes. Roll format, width, length, core size, and winding direction can be matched to direct lamination or downstream slitting.
Confirm the substrate, finish, tack level, roll dimensions, printing requirement, winding direction, dwell time, lamination method, and removal checks.
